
Tired
of missing your favorite TV program, losing that important
document on your PC or having no Lights when your mains
power supply is interrupted unexpectedly. The solution
to these and many other problems caused by the loss
or unreliability of your mains power supply is provided
by the IntelliPower range of Intelligent Uninterruptible
Power Supply Systems.
The UPS seamlessly transfers to battery power when mains power is lost or is unreliable and then seamlessly back to the mains power supply when it is restored. The IntellPower 2 UPS uses a low cost standard high amperage 12 Volt battery which can be sourced easily and anywhere.
The UPS has a built-in charger which starts charging your battery as soon as your mains power supply is restored and allows the battery to be charged while you are using your connected devices on mains power, with no performance loss.
The UPS has visible LED indicators and audible buzzer alarms to notify you clearly and easily what the latest status is of your mains and battery supplies. The IntelliPower 2 is provided with a simple easy to use manual, is user installable and comes supplied with the required battery connection cables.
Features
IntelliPower 2 Standby UPS Specifications
| CAPACITY | VA/W | 1000VA/600W |
| ACINPUT | Nominal Voltage 1 Nominal Frequency | 220/230/240VAC 150Hz or 60Hz (Auto Detection) |
| Voltage Range Selector - Narrow 1 Wide | 170-280VAC 1 90-280VAC | |
| OUTPUT | Voltage 1 Output Wave Form | 230VAC +101-18% 1 Modified Sine Wave |
| Frequency 1 Efficiency AC to AC - DC to AC | 50Hz/60Hz +1- 0.5Hz 1 >95% - >80% | |
| BATTERY 1 CHARGER | Nominal Voltage 1 Charging Voltage 1 Charging Current | 14V DC 1 13.7V +1- O.2V 1 10Amp maximum |
| Overcharge Protection | 16V +1- 0.4V Charger stops and Fault Alarm Sounds | |
| TRANSFER TIME | Typical AC to DC or DC to AC | Typical 15-20ms - 40ms maximum |
| INDICATORS | AC (Mains) with DC (Battery) Charging Mode | Green LED Flashing every 2 Seconds |
| Overload - Fault | Red LED Flashing every 0.5 Second 1 Red LED Lit | |
| AUDIBLE ALARM | Low Battery Voltage in Battery Mode | Alarm sound beeps every 2 Seconds |
| Overload 1 Fault | Alarm sound beeps every 0.5 Seconds 1 Alarm Sound Continuously | |
| PROTECTION FEATURES | Built-in Protection Features
|
Deep Discharge, Overcharge, Short Circuit, Overload, Battery Short, Over Voltage, Under Voltage |
| PHYSICAL | Dimension (D x W x H) mm 1 Net Weight (Kgs) | 249mm x 242mm x 80mm 1 2.5Kg |
| ENVIRONMENT | Operating Environment 1 Noise Level | 0-40C Temperature 0-90% Relative Humidity (Non-Condensing) 1 Less than 45dB |
Application Examples
| IntelliPower 2 | IntelliPower 4 | Device Supported |
|---|---|---|
| 6 to 8 hours | 8 to 10 hours | 2 x 60 Watt lights plus 1 x PC System + 1 x Printer |
| 6 to 8 hours | 8 to 10 hours | 170-280VAC 1 90-280VAC |
| 6 to 8 hours | 8 to 10 hours | 2 x 60 Watt lights plus
1 x 32" LCD Monitor or 40" Plasma Screen plus 1 x DVD plus 1 x Home theatre system + 1 x Satellite Dish plus 1 x PVR or DSTV Decoder |
| 4 to 6 hours | 6 to 8 hours | 5 x 60 Watt lights |
| 6 to 8 hours | 8 to 10 hours | 2 x 60 Watt lights plus
1 x 54 or 74cm TV |
| 4 to 6 hours | 6 to 8 hours | 2 x 60 Watt lights plus
1 x bar fridge/freezer |
| 4 to 6 hours |
2 x 60 Watt lights plus |
|
| 4 to 6 hours | 1 x 60 Watt light plus 1 x 54 or 74cm TV plus 1 x DVD player plus 1 x Home theatre system plus 1 x PVR or DSTV Decoder plus 1 x Cellphone charger plus 1 x Microwave oven (1000 Watts or lower input) can be used, nothing larger. |
|
| Important: These appliances cannot run on these units | Toasters, Irons, Stoves, Kettles, Hairdryers, Heaters, Geysers. | |